User's Manual

2-12 PMP320HDW2v1
Preliminary
JUL
2010
PMP 320 Hardware Installation Earth Ground cable assembly and connection
Procedure 2-1 Assemble the AP and antenna for pole mounting (Continued)
Pole Is Shown
For Reference
Antenna
Radio
(Secured on Antenna)
VIEW A
DIV connector
MAIN connector
Earth Ground cable assembly and connection
Standard installation practices apply which include:
• use of shielded Ethernet cable for all infrastructure cabling
• use of drip loops at any point where the cable changes direction
• extra cable (a splice loop) is provided for future use at any termination
• ensuring the tower or structure is fully grounded (Protective Earth – PE)
• use water tight tape, followed by electrical tape on all N - connectors
Procedure 2-2 Cabling and grounding the AP
Continued