User's Manual

Preliminary
JUL
2010
General information
General information
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
Purpose
Motorola documents provide the information to operate, install, and maintain Motorola
equipment. It is recommended that all personnel engaged in such activities be properly trained
by Motorola.
Motorola disclaims all liability whatsoever , implied or expressed, for any risk of damage, loss or
reduction in system performance arising directly or indirectly out of the failure of the customer,
or anyone acting on the customer's behalf, to abide by the instructions, system parameters, or
recommendations made in this document.
These documents are not intended to replace the system and equipment training offered by
Motorola. They can be used to supplement and enhance the knowledge gained through such
training.
NOTE
If this document was obtained when attending a Motorola training course, it is not
updated or amended by Motorola. It is intended for TRAINING P URPOSES ONL Y . If it
was supplied under normal operational circumstances, to support a major software
release, then Motorola automatically supplies corrections and posts on the Motorola
customer website.
Cross references
References made to external publications are shown in italics. Other cross references,
emphasized in blue text in electronic versions, are active links to the references.
This document is divided into numbered chapters that are divided into sections. Sections are
not numbered, but are individually named at the top of each page, and are listed in the table of
contents.
Document banner definitions
A banner indicates that some information contained in the document is not yet approved for
general customer use. A banner is oversized text on the bottom of the page, for example,
PRELIMINARY — UNDER DEVELOPMENT
PMP320HDW2v1 3