User's Manual

PMP320HDW2v1 7-23
Preliminary
JUL
2010
PMP 320 Hardware Installation Dual Polarization/Dual Slant Subscriber Antenna
Specifications
The Dual P olarized / Dual Slant Subscriber Antenna is produced with the following specifications:
Table 7-1 Dual Polarized / Dual Slant Subscriber Antenna Electrical Specifications
Specification Value
Frequency range 3.3 – 3.8 GHz
GAIN : H-P ort & V -P ort 22dBi
VSWR, max. 1.7 : 1
P olarization Dual P ole Linear , V ertical & Horizontal
Dual Slant (optional) ± 45°
3 dB Beam-W idth, H-Plane, typ. 12°
3 dB Beam-W idth, E-Plane, typ. 12°
Cross P olarization, max ETSI TS3
Front to Back R atio, max. ETSI TS3
P ort to P ort Isolation, typ. -35 dB
Input power, max 10 W att
Input Impedance 50 Ohm
Lightning Protection DC Grounded
Table 7-2 Dual Polarized / Dual Slant Subscriber Antenna Mechanical Specifications
Specification Value
Dimensions (HxWxD) 370 x 370 x 40 mm (14.5" x14.5" x1.6")
W eight 2.1 kg
Connector 2x SMA, F emale or 2x N- Type, F emale
Back Plane Aluminum; protected through chemical
passivation
R adome Plastic UV Protected
Mount MN T -22
Table 7-3 Dual Polarized / Dual Slant Subscriber Antenna Environmental
Specifications
Specification Value
Operating T emperature R ange - 55°C to + 65°C
V ibration According to IEC 60721-3-4
W ind Load 200 km/h (survival)
Flammability UL94
Continued