User's Manual

PMP 400/430 and PTP 200 Series Canopy User Guide
Supplement
Issue 4 0 – DRAFT 6 November 2009 Page 60 of 64
Table 14: Disclosure Table
部件名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr
6+
)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
金属部件
× ○ × × ○ ○
电路模块
× ○ × × ○ ○
电缆及电缆组件
× ○ × × ○ ○
塑料和聚合物部件
○ ○ ○ ○ ○ ×
○： 表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006 标准规定的限量要求以下。
×： 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006 标准规定的限量要求。
6.3 EXPOSURE SEPARATION DISTANCES
To protect from overexposure to RF energy, install Canopy radios so as to provide and maintain
the minimum separation distances from all persons shown in Table 15.
Table 15: Exposure Separation Distances
Module Type Separation Distance from Persons
PMP 400/430 AP or SM or PTP 200 BH At least 20 cm (approx 8 in)
Canopy Module (for comparison) At least 20 cm (approx 8 in)
Section 6.3.1 and Table 16 give details and discussion of the associated calculations.
6.3.1 Details of Exposure Separation Distances Calculations and Power Compliance
Margins
Limits and guidelines for RF exposure come from:
• US FCC limits for the general population. See the FCC web site at
http://www.fcc.gov
, and the policies, guidelines, and requirements in Part 1 of Title 47
of the Code of Federal Regulations, as well as the guidelines and suggestions for
evaluating compliance in FCC OET Bulletin 65.
• Health Canada limits for the general population. See Safety Code 6 on the Health
Canada web site at Error! Hyperlink reference not valid..
• ICNIRP (International Commission on Non-Ionizing Radiation Protection) guidelines
for the general public. See the ICNIRP web site at http://www.icnirp.de/
and