User's Manual

PMP 400/430 and PTP 200 Series Canopy User Guide
Supplement
Issue 4 0 – DRAFT 6 November 2009 Page 6 of 64
Figure 15: 600SS pole mount kit ..................................................................................... 21
Figure 16: PMP 430 SM .................................................................................................. 23
Figure 17: PMP 430 SM with Optional LENS .................................................................. 23
Figure 18: PMP 400 and PTP 200 radio with integrated antenna ................................... 24
Figure 19: PMP 400/430 connectorized radio ................................................................. 24
Figure 20: CAP 49400 ..................................................................................................... 25
Figure 21: CAP 58430 and CAP 54400 .......................................................................... 25
Figure 22: Dynamic Rate Adapt on AP "Configuration => General" page ...................... 33
Figure 23: SM Power Level on AP “Home => Session Status” page. ............................. 35
Figure 24: Max Range & Downlink Data on AP "Configuration => Radio" page. ............ 36
Figure 25: DFS Status on AP "Home => DFS Status" page. .......................................... 37
Figure 26: Region Code on AP “Configuration => General” page .................................. 41
Figure 27: Configured Region Code on SM Configuration => General page .................. 42
Figure 28: Active Region Code on SM Home => General Status page .......................... 42
Figure 29: Ground lug highlighted on AP ........................................................................ 52
Figure 30: Dielectric Grease – Apply to RJ45 connector ................................................ 53
Figure 31: Dielectric Grease - Insert Ethernet Cable ...................................................... 54
List of Procedures
Procedure 1: Finding collocation values using Frame Calculators ................................. 32
Procedure 2: Assembling a 5.8 or 5.4 GHz AP, and attaching to tower ......................... 47
Procedure 3: Assembling a 4.9 GHz AP, and attaching to tower .................................... 49
Procedure 4: Cabling and Grounding/Earthing the AP ................................................... 52