User's Manual
Table Of Contents
- 1 Introduction
- 2 Product Description
- 2.1 TECHNOLOGY AND BENEFITS
- 2.2 APPLICATIONS
- 2.3 CONFIGURATION OPTIONS – RF, IP, DFS
- 2.4 POWER AND GROUNDING
- 2.5 ADMINISTRATION SYSTEMS
- 2.6 SPECIFICATIONS
- 2.6.1 Radio specifications (common to all formats)
- 2.6.2 Specifications for PMP 430 SM radio with integrated antenna
- 2.6.3 Specifications for PMP 430 SM radio with optional LENS
- 2.6.4 Specifications for PMP 400 and PTP 200 radio with integrated antenna
- 2.6.5 Specification for PMP 400 and 430 connectorized radio
- 2.6.6 Specifications for PMP 400/430 kitted, connectorized radio (antenna included)
- 2.7 PERFORMANCE
- 3 Planning
- 4 Configuring
- 4.1 LINK OPERATION – 1X/2X/3X
- 4.2 TRANSMITTER OUTPUT POWER (AND NO JITTER)
- 4.3 DOWNLINK DATA %, RANGE, AND CONTROL SLOTS
- 4.4 DFS AND REGULATORY PARAMETERS FOR 5.8 & 5.4 GHZ RADIOS
- 4.5 NET ANTENNA GAIN FIELD
- 4.6 NETWORK CONTROL PARAMETERS
- 4.7 FORWARD ERROR CORRECTION
- 4.8 CYCLIC PREFIX (CONFIGURABLE ONLY ON PTP 200 BH & PMP 430 AP/SM)
- 5 Installation
- 6 Regulatory and Legal Notices
- 6.1 IMPORTANT NOTE ON MODIFICATIONS
- 6.2 NATIONAL AND REGIONAL REGULATORY NOTICES
- 6.2.1 U.S. Federal Communication Commission (FCC) Notification
- 6.2.2 Industry Canada (IC) Notification
- 6.2.3 Regulatory Requirements for CEPT Member States (www.cept.org)
- 6.2.4 Equipment Disposal
- 6.2.5 EU Declaration of Conformity for RoHS Compliance
- 6.2.6 Luxembourg Notification
- 6.2.7 Czech Republic Notification
- 6.2.8 Greece Notification
- 6.2.9 Brazil Notification
- 6.2.10 Labeling and Disclosure Table for China
- 6.3 EXPOSURE SEPARATION DISTANCES
- 6.4 LEGAL NOTICES
- 6.5 LIMIT OF LIABILITY
PMP 400/430 and PTP 200 Series Canopy User Guide
Supplement
Issue 4 0 – DRAFT 6 November 2009 Page 8 of 64
This guide should be used along with the Canopy System Release 8 User Guide, which covers
general information, including all network features, RF control features, and GUI (Graphical User
Interface) features common across PMP 100, 400, and 500 Series networks and PTP 100 and
200 Series bridges. The Canopy System Release 8 User Guide is available from the “User
Guides” section of the Canopy Document Library,
http://motorola.motowi4solutions.com/support/library/?region=1&cat=8
.
This guide assumes that the reader has general RF (Radio Frequency) and Internet Protocol (IP)
knowledge and background.
This issue, Issue 4, is consistent with features provided by Canopy Release 9.5 and 10.0.
Separate Release Notes for each release are available and include open issues and other
important information specific to each release.
1.1 DOCUMENT CHANGE HISTORY
Issue 1
First Issue
Issue 2
Added the following:
• PTP 54200 BHs
• Products using AES encryption
• Release 8.4.3 features
Issue 3
Issue 4 Draft 5
Added the following 4.9-GHz public safety band products:
• PMP 49400 APs and SMs
• PTP 49200 BHs
Made consistent with Canopy Release 9.4.2
Added the following
• PMP 430 APs and SMs
• Release 9.5 features to support PMP 400 and PTP
200 Series products
• Release 10.0 features to support PMP 430 Series
products only (10 MHz Channel)
• Updated customer support email and phone numbers