User's Manual
Table Of Contents
- 1 Introduction
- 2 Product Description
- 2.1 TECHNOLOGY AND BENEFITS
- 2.2 APPLICATIONS
- 2.3 CONFIGURATION OPTIONS – RF, IP, DFS
- 2.4 POWER AND GROUNDING
- 2.5 ADMINISTRATION SYSTEMS
- 2.6 SPECIFICATIONS
- 2.6.1 Radio specifications (common to all formats)
- 2.6.2 Specifications for PMP 430 SM radio with integrated antenna
- 2.6.3 Specifications for PMP 430 SM radio with optional LENS
- 2.6.4 Specifications for PMP 400 and PTP 200 radio with integrated antenna
- 2.6.5 Specification for PMP 400 and 430 connectorized radio
- 2.6.6 Specifications for PMP 400/430 kitted, connectorized radio (antenna included)
- 2.7 PERFORMANCE
- 3 Planning
- 4 Configuring
- 4.1 LINK OPERATION – 1X/2X/3X
- 4.2 TRANSMITTER OUTPUT POWER (AND NO JITTER)
- 4.3 DOWNLINK DATA %, RANGE, AND CONTROL SLOTS
- 4.4 DFS AND REGULATORY PARAMETERS FOR 5.8 & 5.4 GHZ RADIOS
- 4.5 NET ANTENNA GAIN FIELD
- 4.6 NETWORK CONTROL PARAMETERS
- 4.7 FORWARD ERROR CORRECTION
- 4.8 CYCLIC PREFIX (CONFIGURABLE ONLY ON PTP 200 BH & PMP 430 AP/SM)
- 5 Installation
- 6 Regulatory and Legal Notices
- 6.1 IMPORTANT NOTE ON MODIFICATIONS
- 6.2 NATIONAL AND REGIONAL REGULATORY NOTICES
- 6.2.1 U.S. Federal Communication Commission (FCC) Notification
- 6.2.2 Industry Canada (IC) Notification
- 6.2.3 Regulatory Requirements for CEPT Member States (www.cept.org)
- 6.2.4 Equipment Disposal
- 6.2.5 EU Declaration of Conformity for RoHS Compliance
- 6.2.6 Luxembourg Notification
- 6.2.7 Czech Republic Notification
- 6.2.8 Greece Notification
- 6.2.9 Brazil Notification
- 6.2.10 Labeling and Disclosure Table for China
- 6.3 EXPOSURE SEPARATION DISTANCES
- 6.4 LEGAL NOTICES
- 6.5 LIMIT OF LIABILITY
PMP 400/430 and PTP 200 Series Canopy User Guide
Supplement
Issue 4 0 – DRAFT 6 November 2009 Page 56 of 64
Table 13: US FCC IDs and Industry Canada Certification Numbers and Covered Configurations
FCC ID Industry
Canada Cert
Number
Frequencies Module
Families
Antenna Maximum
Tx Output
Power
ABZ89FT7634
---
10 MHz channels,
centered on 5730-
5845 in 5 MHz
increments (within the
5725-5850 MHz ISM
band)
5780APC
16 dBi connectorized
PCTEL Model
8514724E01 antenna (60°
x 5° -3 dB beam width)
with 1 dB connector cable
loss
20 dBm
ABZ89FT7635
---
10 MHz channels,
centered on 5730-
5845 in 5 MHz
increments (within the
5725-5850 MHz ISM
band)
5790SM
10 dBi (55° x 55° and 3 dB
beam width)
19 dBm
---
109W-5780 10 MHz channels,
centered on 5730-
5845 in 5 MHz
increments (within the
5725-5850 MHz ISM
band)
5780APC
16 dBi connectorized
PCTEL Model
8514724E01 antenna (60°
x 5° -3 dB beam width)
with 1 dB connector cable
loss
20 dBm
---
109W-5790 10 MHz channels,
centered on 5730-
5845 in 5 MHz
increments (within the
5725-5850 MHz ISM
band)
5790SM
10 dBi (55° x 55° and 3 dB
beam width)
19 dBm
ABZ89FT7629 --- 10 MHz channels,
centered on 5480-
5710 in 5 MHz
increments (within the
5470-5725 MHz U-NII
band)
5440 AP
18 dBi connectorized
PCTEL Model
8514724E01 antenna (60°
x 5° -3 dB beam width)
with 1 dB connector cable
loss
10 dBm
5440 SM
5440 BH
17 dBi integrated antenna
(15° x 15° -3 dB beam
width)
10 dBm
--- 109W-5440 10 MHz channels,
centered on 5480-
5595 and 5655-5710
MHz in 5 MHz
increments (within the
5470-5725 MHz U-NII
band with 5600-5650
MHz excluded)
5440 AP
18 dBi connectorized
PCTEL Model
8514724E01 antenna (60°
x 5° -3 dB beam width)
with 1 dB connector cable
loss
10 dBm
5440 SM
5440 BH
17 dBi integrated antenna
(15° x 15° -3 dB beam
width)
10 dBm
ABZ89FT7631 109W-4940 10 MHz channels,
centered on 4945-
4985 in 5 MHz
increments (within the
4940-4990 MHz
public safety licensed
band)
4940 AP
18 dBi connectorized
PCTEL Model AP
85010066001 antenna (60°
x 5° -3 dB beam width)
with 1 dB cable loss
18 dBm
4940 SM
4940 BH
17 dBi integrated antenna
(15.5° x 17.5° (el x az) -3
dB beam width)
18 dBm