User's Manual
Table Of Contents
- 1 Introduction
- 2 Product Description
- 2.1 TECHNOLOGY AND BENEFITS
- 2.2 APPLICATIONS
- 2.3 CONFIGURATION OPTIONS – RF, IP, DFS
- 2.4 POWER AND GROUNDING
- 2.5 ADMINISTRATION SYSTEMS
- 2.6 SPECIFICATIONS
- 2.6.1 Radio specifications (common to all formats)
- 2.6.2 Specifications for PMP 430 SM radio with integrated antenna
- 2.6.3 Specifications for PMP 430 SM radio with optional LENS
- 2.6.4 Specifications for PMP 400 and PTP 200 radio with integrated antenna
- 2.6.5 Specification for PMP 400 and 430 connectorized radio
- 2.6.6 Specifications for PMP 400/430 kitted, connectorized radio (antenna included)
- 2.7 PERFORMANCE
- 3 Planning
- 4 Configuring
- 4.1 LINK OPERATION – 1X/2X/3X
- 4.2 TRANSMITTER OUTPUT POWER (AND NO JITTER)
- 4.3 DOWNLINK DATA %, RANGE, AND CONTROL SLOTS
- 4.4 DFS AND REGULATORY PARAMETERS FOR 5.8 & 5.4 GHZ RADIOS
- 4.5 NET ANTENNA GAIN FIELD
- 4.6 NETWORK CONTROL PARAMETERS
- 4.7 FORWARD ERROR CORRECTION
- 4.8 CYCLIC PREFIX (CONFIGURABLE ONLY ON PTP 200 BH & PMP 430 AP/SM)
- 5 Installation
- 6 Regulatory and Legal Notices
- 6.1 IMPORTANT NOTE ON MODIFICATIONS
- 6.2 NATIONAL AND REGIONAL REGULATORY NOTICES
- 6.2.1 U.S. Federal Communication Commission (FCC) Notification
- 6.2.2 Industry Canada (IC) Notification
- 6.2.3 Regulatory Requirements for CEPT Member States (www.cept.org)
- 6.2.4 Equipment Disposal
- 6.2.5 EU Declaration of Conformity for RoHS Compliance
- 6.2.6 Luxembourg Notification
- 6.2.7 Czech Republic Notification
- 6.2.8 Greece Notification
- 6.2.9 Brazil Notification
- 6.2.10 Labeling and Disclosure Table for China
- 6.3 EXPOSURE SEPARATION DISTANCES
- 6.4 LEGAL NOTICES
- 6.5 LIMIT OF LIABILITY
PMP 400/430 and PTP 200 Series Canopy User Guide
Supplement
Issue 4 0 – DRAFT 6 November 2009 Page 26 of 64
2.7 PERFORMANCE
Table 7 shows performance details for PMP 400/430 and PTP 200 series.
Table 7: Performance Details
Product
Channel
Width
Parameter
Performance Details
1X 2X 3X
PMP 58430
(5.8 GHz OFDM)
10 MHz
Modulation QPSK 16 QAM 64 QAM
Typical Maximum Range 7 mi/ 11.2km 3 mi/ 4.8km 2 mi/3.2 km
Typical Maximum Aggregate
(up+down) Throughput
7 Mbps 14 Mbps 20 Mbps
Nominal Receive Sensitivity
(including FEC)
-89 dBm -78 dBm -70 dBm
Latency 5-7 msec
PMP 54400
PTP 54200
(5.4 GHz OFDM)
10 MHz
Modulation QPSK 16 QAM 64 QAM
Typical Maximum Range 5 mi/8 km 2.5 mi/4 km 1.25 mi/2 km
Typical Maximum Aggregate
(up+down) Throughput
7 Mbps 14 Mbps
PMP: 20 Mbps
PTP: 21 Mbps
Nominal Receive Sensitivity
(including FEC)
-89 dBm -78 dBm -70 dBm
Latency 5-7 msec
PMP 49400
PTP 49200
(4.9 GHz OFDM)
10 MHz
Modulation QPSK 16 QAM 64 QAM
Typical Maximum Range 15 mi/24 km 4 mi/6.5 km 2 mi/3.2 km
Typical Maximum Aggregate
(up+down) Throughput
7 Mbps 14 Mbps 20 Mbps
Nominal Receive Sensitivity
(including FEC)
-89 dBm -80 dBm -71 dBm
Latency 5-7 msec