User's Manual
Table Of Contents
- 1.0 Using This User Guide
- 1.1 FINDING THE INFORMATION YOU NEED
- 1.2 Becoming Familiar with This User Guide
- 1.3 Searching This User Guide
- 1.4 Finding Parameter and Field Definitions for Module Web Pages
- 1.5 NEW PRODUCTS AND FEATURES DESCRIBED IN THIS ISSUE
- 1.6 NEW DESCRIPTIONS AND REVISIONS IN THIS ISSUE
- 1.7 PORTFOLIO OF WIRELESS BROADBAND SOLUTIONS
- 1.8 PRODUCTS COVERED BY THIS USER GUIDE
- 1.9 PRODUCTS NOT COVERED BY THIS USER GUIDE
- 1.10 CONVENTIONS
- 1.11 TECHNICAL SUPPORT
- 1.12 FEEDBACK ON DOCUMENTATION
- 2 Product Description
- 3 Regulatory, Legal, and Safety Notices
- 4 Checking Software Version
- 5 User Account Overview
- 6 IP Configuration
- 7 RF Parameter Configuration
- 8 CPE RF Parameter Configuration
- 9 Authentication Configuration
- 10 Quality of Service Configuration
- 11 Appendix A – AAA Server Installation
- 12 Appendix B – Troubleshooting
2. Connect antenna brackets to
the antenna. Assemble with
the “scissor bracket” pointing
up
(unlike in the
accompanying pictures) to
avoid physical interference
between the bracket and the
radio housing.
3. Connect the radio to the
antenna by sliding it into the
captive space. Secure the
radio to the antenna using the
two bolts provided.
4. Connect both coax N-connectors from the radio to the antenna. Connect the cable labeled
ector labeled “main”, and connect the cable labeled “Diversity”
“main” to the antenna conn
to the antenna connector labeled “Diversity”.
17