User's Guide

Table Of Contents
A tone sounds.
The red LED blinks.
NOTE:
Your radio automatically acknowledges the
Emergency Alarm (if enabled).
To return to home screen, perform the following
actions:
a Press .
b Press
or to Yes.
c Press
to select.
The radio returns to the home screen and the display
shows the Emergency icon.
7.12.6
Reinitiating Emergency Mode
Perform one of the following actions:
Change the channel while the radio is in
Emergency mode.
NOTE:
You can reinitiate emergency mode only if
you enable emergency alarm on the new
channel.
Press the programmed Emergency On button
during an emergency initiation or transmission
state.
The radio exits the Emergency mode, and reinitiates
Emergency.
7.12.7
Exiting Emergency Mode After Sending
the Emergency Alarm
This feature is only applicable to the radio sending the
Emergency Alarm.
Your radio exits Emergency mode when:
An acknowledgment is received (for Emergency Alarm
only).
English
60