User's Guide

indicating the channel is free for you to respond.
Press the PTT button to respond to the call.
•
If the Transmit Interrupt Remote Dekey feature
is enabled, press the PTT button to stop an
ongoing interruptible call and free the channel for
you to respond.
The green LED lights up.
2 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
3 Release the PTT button to listen.
The call ends when there is no voice activity for a
predetermined period.
6.3
All Calls
An All Call is a call from an individual radio to every radio
on the channel. An All Call is used to make important
announcements, requiring full attention from the user. The
users on the channel cannot respond to an All Call.
6.3.1
Receiving All Calls
When you receive an All Call:
• A tone sounds.
• The green LED blinks.
• Your radio unmutes and the incoming call sounds
through the speaker.
An All Call does not wait for a predetermined period before
ending.
If the Channel Free Indication feature is enabled, you
hear a short alert tone when the transmitting radio releases
the PTT button, indicating the channel is free for you to
use.
You cannot respond to an All Call.
NOTE:
The radio stops receiving the All Call if you switch to
a different channel while receiving the call. You are
not able to continue with any programmed button
functions until the end of an All Call.
English
37