User's Guide
Table Of Contents
- Contents
- List of Figures
- List of Tables
- Legal and Support
- Radio Care
- Radio Overview
- Getting Started
- Home Screen Overview
- General Radio Operation
- 5.1 Selecting Zones
- 5.2 Selecting Channels
- 5.3 Mode Select Feature
- 5.4 Selecting the Power Level
- 5.5 Selecting a Radio Profile
- 5.6 Enabling and Disabling the Radio Alias
- 5.7 Adjusting the Display Backlight
- 5.8 Editing the Time and Date
- 5.9 Locking and Unlocking the Controls
- 5.10 Setting the Tones for Controls and Buttons
- 5.11 Setting the Voice Mute
- 5.12 Using the Time-Out Timer
- 5.13 Adjusting the Squelch Level
- 5.14 Conventional Squelch Operation
- 5.15 Using the PL Disable Feature
- 5.16 Digital PTT ID Support
- 5.17 General Radio Information
- Trunking System Controls
- Types of Radio Calls
- Emergency Operation
- Fireground
- Tactical Public Safety (Conventional Only)
- Man Down (Fall Alert)
- Secure Operations
- Scan
- Scan Lists
- Connectivity
- Location
- Mission Critical Geofence (ASTRO 25 Trunking)
- Contacts
- Recent Calls
- Sending Status
- Call Alert Paging
- Automatic Registration Service
- User Login Feature
- Text Messaging Service
- Monitor Feature
- Remote Monitor
- Transmit Inhibit
- Dynamic Regrouping (Trunking Only)
- Dynamic Zone Programming
- Zone-to-Zone Cloning
- Radio Kill
- Radio Inhibit
- Voice Announcement
- Site Selectable Alerts
- Additional Performance Enhancement
• A tone sounds.
• The display shows the configurable programmed alert text and intelligent lighting.
Procedure:
1 To respond, perform one of the following actions:
• Press the 3-Dot Programmable button.
• If the radio is connected to the Remote Speaker Microphone (RSM), press the 1-Dot button
on the RSM.
• Press the PTT button.
NOTE: The PTT button must be configured in Customer Programming Software (CPS) to
enable this function.
The radio cancels the indications, a tone sounds, and the radio sends an acknowledgment to the
command terminal.
9.3
Sending Evacuation Tone
Procedure:
1 Press and hold the PTT button.
2 Press the Emergency button.
A tone sounds when the Emergency button is released. The tone sounds in all radios within the
talkgroup until the PTT button is released.
NOTE: Radio does not transmit evacuation tone if the radio is in secure mode.
MN009363A01-AA
Chapter 9 : Fireground
55