User's Guide

Function Description
TMS Query Launches a list of predefined short text messages only after
logging in with Two-Factor Authentication.
TMS Quick Text Selects a predefined message.
Transmit Power Level Toggles between the power levels at which your radio trans-
mits.
Unprogrammed Select this feature for a radio button that is not in use.
User Allows you to log on to the server with a personally identifia-
ble user name.
Voice Mute Allows you to mute the voice transmission of the current
zone and channel.
Volume Set Tone Sets the volume set tone.
2.3
ViQi
ViQi is a virtual assistant that helps you manage your radio and perform information lookups using
voice commands. This feature is purpose-built for easier access to features.
You are able to operate the radio with your voice using the following commands.
Table 4: ViQi Basic Voice Control Commands
Feature Examples
Battery To identify your battery level, say the following command:
• "Battery level"
Channel To identify your current channel, say the following command:
• "Channel"
Home Channel To change to your home channel, say the following command:
• "Go to home"
Preset To change the preset of your radio, say "Preset <Preset
Number>." The available Preset number is from <1> to <7>.
Profile To change the profile of your radio, say the following commands:
• "Default profile”
• “Loud audio profile”
• “Surveillance profile”
Scan To start or stop scanning, say the following commands:
• "Start scanning"
• "Stop scanning"
Volume To change the volume level of your radio, say one of the availa-
ble commands according to required volume levels:
• <Volume Low> – 10%
MN009363A01-AA
Chapter 2 : Radio Overview
26