User's Guide

Network Zones Channels Channels per Zone
WAVE 6 96 16
11.3.1
Selecting Zone
Procedure:
Perform one of the following actions:
•
To select a zone, tap Radio Control Widget→Current Zone→<required
zone>→<required channel>.
• To select a zone from Recent tab, tap Radio Control Widget→Recent→<required zone
and channel>.
• To search for zone,
More→ Ch Search→<required zone>→<required
channel>
11.3.2
Selecting Channel
Procedure:
Perform one of the following actions:
•
To select a channel, tap Radio Control Widget→<required channel>.
• To select a channel from Recent tab, tap Radio Control Widget→Recent→<required
zone and channel>.
• To search for channel, tap
More→ Ch Search→<required channel>.
•
To select a channel using the Channel Selector knob, rotate the Channel Selector knob to
the required position.
11.3.2.1
Channel Error Messages
If there is a channel error, your radio displays the following error messages on the Radio Control
Widget.
Type Description
Unprogrammed The mode is set to an unprogrammed channel.
Fail 001 The selected channel is assigned to an incorrect frequency band.
11.4
Talkaround
This feature allows you to continue communicating when your repeater is non-operational, or when
your radio is out of range from the repeater but within the talk range of other radios.
The talkaround setting is retained even after powering down.
MN006217A01-AF
Chapter
11 : Basic Radio Operation
69