User's Guide

Table Of Contents
Procedure:
1 Turn off the radio.
2 Place the radio in a Motorola Solutions approved charger.
The charger LED illuminates.
NOTE:
If the charger LED blinks in red when charging, reinsert your radio.
If the charger detects the new IMPRES battery, it automatically starts initialization.
Initialization is the first calibration and reconditioning of an IMPRES battery. For more
information about Motorola Solutions approved charger, see Manual Part Number:
MN006348A01 at https://learning.motorolasolutions.com/.
3 To remove the radio from the charger, pull the radio upwards.
NOTE:
Your radio takes approximately six to ten seconds to update the battery information
once the radio is removed from the charger.
For more information, see Battery Information on page 58.
MN006217A01-AF
Chapter 6 : Getting Started
35