User's Guide

Table Of Contents
Detaching the Battery
Procedure:
1 Slide the battery latch into unlock position.
2 Remove the battery from the slot at the bottom of the radio.
6.4
Attaching or Detaching the Accessory Connector Cover
To prevent damage to the accessory connector, shield it with the connector cover when not in use.
Attaching the Accessory Connector Cover
Procedure:
1 Insert the hooked end of the cover into the slot above the connector.
2 Press the top of the cover down to seat it in the slot.
3 Rotate the thumbscrew clockwise to tighten the cover.
Detaching the Accessory Connector Cover
Procedure:
1 Rotate the thumbscrew counterclockwise until it disengages from the radio.
2 Rotate outwards and lift the connector cover to disengage it from the radio.
6.5
Attaching or Detaching the Antenna
Attaching the Antenna
Procedure:
1 Set the antenna in the receptacle.
2 Turn the antenna clockwise.
Detaching the Antenna
Procedure:
1 Turn the antenna counterclockwise.
2 Remove the antenna from the receptacle.
6.6
Charging the Battery
Your radio does not show charging icon or LED indication on the front or top display during charging.
The charging based estimation is with 25% granularity (5% 25%, 50%, 75%, 100%). The radio front
display shows 50% charging when the radio powers up, and returns to normal battery percentage
indicator after the synchronization completes.
MN006217A01-AF
Chapter
6 : Getting Started
34