User's Guide

Chapter 6
Getting Started
Getting Started provides instructions to prepare your radio for use.
6.1
Inserting or Removing MicroSD Card
Procedure:
1 Slide the battery latch into unlock position.
2 Remove the battery from the slot at the bottom of the radio.
3 Remove the microSD card cover and the microSD card tray.
4 Perform one of the following actions:
•
To insert, place the microSD card into the tray.
• To remove, take the microSD card out from the tray.
NOTE: Only FAT32 microSD card format is supported. If you insert an unsupported
microSD card, you are prompted to format the microSD card. Formatting leads to data
erasure.
6.2
Inserting or Removing SIM Card
NOTE: This task is not applicable to eSIM.
Your radio supports private or public SIM card.
Procedure:
1 Slide the battery latch into unlock position.
2 Remove the battery from the slot at the bottom of the radio.
3 Remove the SIM card cover and the SIM card tray.
4 Perform one of the following actions:
•
To insert, place the SIM card into the tray.
• To remove, take out the SIM card from the tray.
6.3
Attaching or Detaching the Battery
Attaching the Battery
Procedure:
1 Fit the battery into the slot at the bottom of the radio.
2 Push the top of the battery down until the latch snaps into place.
MN006217A01-AF
Getting Started
33