User's Guide

Option Actions
b Toggle Broadband Network to on.
When Broadband Network switch toggles to on, you are using the WAVE Network on Converged
Channels.
Turning Broadband Network Switch to Off
Procedure:
Perform one of the following actions:
Option Actions
Disabling Auto Network
Switch with Menu Feature
Launcher
a From the Menu Feature Launcher Widget, tap
More→Radio Network Set..
b Toggle Broadband Network to off.
Disabling Auto Network
Switch with Radio Quick Set-
tings
a From the Radio Control Widget, tap
Radio
Quick Settings.
b Toggle Broadband Network to off.
When Broadband Network switch toggles to off, you are using the LMR Network on the Converged
Channels.
5.4
Enable and Disable PTT Service
When you are in WAVE and Converged WAVE channels, your radio only receives Enable and Disable
PTT service triggered by an authorized user. You are unable to initiate the Enable or Disable PTT
service.
When the authorized user initiates Disable PTT, your radio shows the following indications:
•
The top display shows No WAVE Server.
• The display shows Service Suspended pop-up message.
• If you press the PTT button, a negative tone sounds.
When the authorized user initiates Enable PTT, your radio shows PTT is enabled.
MN006217A01-AF
Chapter 5 : Seamless Voice
32