User's Guide

32.2
Making Non-DGNA Calls
Procedure:
Perform one of the following actions:
•
If your radio is in DGNA mode, press the programmed One Touch Access button.
• If your radio is not in DGNA mode, press and hold the PTT button.
Your radio shows the following indications:
• A positive tone sounds.
• Voice Announcement sounds.
• The top display and Radio Control Widget shows <Talkgroup Alias> and Press PTT
momentarily.
NOTE:
If your radio is not in DGNA mode and you press the One Touch Access button, your radio
sounds a negative tone, indicating error. The display remains unchanged.
When a PTT button is press before a negative tone sounds, your radio returns to the home
screen. When your radio is in the home screen, a PTT press makes a call to the DGNA
talkgroup.
32.3
Receiving and Responding to DGNA Calls
When you receive a DGNA call, your radio shows the following indications:
•
A DGNA tone sounds.
• The DGNA icon appears in the top display and Radio Control Widget.
• Your radio unmutes and the incoming call sounds through the speaker.
Procedure:
1 To call, press and hold the PTT button.
2 To listen, release the PTT button.
MN006217A01-AF
Chapter 32 : Dynamic Group Number Assignment
113