User's Guide

Chapter 32
Dynamic Group Number Assignment
Dynamic Group Number Assignment (DGNA) is a feature that allows the third-party console to assign
and remove talkgroup dynamically to a radio from over the air.
When the console assigns DGNA to your radio, your current channel is in DGNA mode and shows the
followings:
•
A tone sounds.
• The top display momentarily shows DGNA ASSGNED.
• The display momentarily shows <DGNA Talkgroup Alias> is assigned.
• The DGNA icon appears in the top display and Radio Control Widget.
• The top display and Radio Control Widget show DGNA talkgroup alias.
When the console removes DGNA from your radio, your radio restores the previous talkgroup and
shows the followings:
• A tone sounds.
• The top display momentarily shows DGNA REMOVED.
• The display momentarily shows <DGNA Talkgroup Alias> is removed.
• The DGNA icon disappears from the top display and Radio Control Widget.
• The top display and radio control widget show the previous talkgroup alias.
Depending on how your radio is programmed, you can view, edit, and listen to the original scan lists
channels and the non-DGNA talkgroups.
When your radio is in DGNA mode, press and hold the PTT button allows you to communicate only
with the current DGNA talkgroup. To communicate with the previous non-DGNA talkgroup, program
the programmed One Touch Access button.
NOTE: Check with your dealer or system administrator to determine how your radio has been
programmed.
32.1
Making DGNA Calls
Prerequisites: Your current channel is in DGNA mode.
Procedure:
To call, press and hold the PTT button.
Your radio shows the following indications:
•
A DGNA tone sounds.
• The DGNA icon appears in the top display and Radio Control Widget.
• The top display and Radio Control Widget show DGNA talkgroup alias.
MN006217A01-AF
Chapter 32 : Dynamic Group Number Assignment
112