User's Guide

English
24
1
2
Charging Method
This chapter describes the methods you use to charge your
radio.
4.1
Charging Stand-Alone Battery
3 Slide the battery into the charger pocket, ensuring
complete contact between the charger and battery
contacts.
When the battery is in the pocket, the charger
indicates the Battery Level status as shown in
Charger LED Indication on page 27 table. The red
LED blinks to indicate that the battery is charging
rapidly. The LED changes to a steady green light to
indicate that the battery is nearly or fully charged.
1 Align the raised tab on each side of the battery
with the corresponding groove on each side of the
charger pocket.
2 Press the battery toward the rear of the pocket.
4.2
Charging with the Drop-In Tray
Single Unit Charger
NOTE:
Turn off the radio before charging, and fully charge
the battery before first use. It is best to charge at
room temperature.
1 Place the SUC on a flat surface.
2 Insert the connector of the power supply into the port
on the side of the SUC.