User's Guide

English
107
If... Then... If... Then...
If you hear
heavy static or
interference,
If the Drop-in
Charger LED
light does not
blink,
tone results in the first few words
of the transmission being cut out.
• Recharge, replace, or reposition
the batteries. See Battery Speci-
fications on page 21.
• Change to a location with no in-
terference.
ensure that transmitting and receiv-
ing radios are at least five feet
apart.
perform the following actions:
1 Verify that the radio/battery is
properly inserted.
2 Check the battery/charger con-
tacts to ensure that they are
clean and charging pin is inser-
ted correctly.
Refer to Charging with the Drop-In
Tray Single Unit Charger on page
24, Radio Status on page 39 and
Attaching the Battery on page 32.
If the battery is
low,
If low battery in-
dicator is blink-
ing although
new batteries
are inserted,
If the battery
does not charge
although it has
been placed in
the drop-in
charger for a
while,
recharge or replace the battery.
NOTE:
Extreme operating tem-
perature may affect bat-
tery life. See Battery
Specifications on page
21.
refer to Attaching the Battery on
page 32 and Battery Specifications
on page 21.
perform the following actions:
• Verify that the drop-in tray charg-
er is properly connected and cor-
responds with a compatible pow-
er supply. See Charging with the
Drop-In Tray Single Unit Charger
on page 24 and Charging Stand-
Alone Battery on page 24.