User's Guide

English
103
b Wait three seconds before releasing the buttons
until you hear “Clone Mode Serial” voice prompt
from the Target Radio.
NOTE:
Avoid putting powered on radios (more than
seven radios) in a container together, other
than the Multi-Unit Charger.
NOTE:
Serial cloning for Curve series is compatible
with DLR radios only.
indicating cloning failed voice prompt from the
Target Radio.
3 To start the wireless PROFILE ID Number cloning on
the Source Radio, press and release the Volume Up
button.
• You hear a tone.
• After cloning is completed, you hear "Pass"
indicating cloning is successful or "Fail" indicating
cloning failed voice prompt from the Source
Radio.
• On the Target radio, the radio receives the
PROFILE ID Number information. You hear
"Pass" indicating cloning is successful or "Fail"