User's Guide

Table Of Contents
Icon Description
Non-Secured Call – Air Encryption Unavailable
Blinking – Indicates that Air Encryption is not available in DMO Mode. The icon ap-
pears after the PTT button is pressed.
Non-formatted SD Card
Solid – The microSD card is:
- not formatted at all,
- formatted incorrectly, or
- damaged.
Blinking – The microSD card is being formatted.
USB Connected – Indicates that the radio is connected to the computer via the USB
cable. Visible only in the Mass Storage mode.
Bluetooth Connected – Indicates that Bluetooth is enabled and at least one device
is connected.
Bluetooth Disconnected
Solid – Indicates that Bluetooth is enabled, but no device is connected.
Blinking indicates one of the following:
- Bluetooth is enabled and the radio is in the Discoverable Mode.
- Bluetooth is enabled and a connection with a remote device is being estab-
lished.
An outgoing OPP transfer (upload).
An incoming OPP transfer (download).
Remote Control – Indicates that the radio is being remotely controlled and some
commands are being executed in the background. For example, when the radio is
being controlled by special SDS messages or triggered to send a GNSS location re-
port.
Icon is not visible in Extra Zoom Mode.
2.10
Holding Your Radio
Your radio has two microphones: a top microphone for simplex dispatcher/private calls and a bottom
microphone for duplex telephone-like calls.
The radio is also equipped with an internal speaker for high audio (located at the middle of the unit)
and an internal earpiece for low audio (located at the top of the unit). The audio can be routed either to
the speaker or the earpiece using the Audio Toggle menu (MenuSetupAudioAudio Toggle) or
the assigned One-Touch Button.
NOTE: For best performance speak directly into the top microphone.
MN006260A01-AD
Chapter 2 : Getting Started
51