User's Guide

Table Of Contents
4.10.8
Time and Date
This sub-menu controls the displayed time and date on the home screen.
NOTE: If the Home Display Text Message feature is enabled, Home Mode Display Text may
cover time and date, depending on the Configurable Idle Screen settings. Infrastructure
synchronizes the time and date. When not within the infrastructure signal range you can set the
values manually.
4.10.8.1
Setting Time and Date on the Display
Procedure:
1 From the home screen, press the Menu key.
2 Select SetupTime & DateDisplay.
3 Select one of the following options:
Time & Date – Your radio displays time and date.
Time Only – Your radio displays time only. Format Date sub-menu is disabled.
Date Only – Your radio displays date only. Format Time sub-menu is disabled.
Off – Your radio does not display time nor date. Format menu is disabled.
4.10.8.2
Setting the Time Format
Prerequisites: If MenuSetupTime & DateDisplay is set to Time & Date or Time Only.
Procedure:
1 From the home screen, press the Menu key.
2 Select SetupTime & DateFormatFormat Time.
3 Select one of the following options:
12-Hour – Displays the time with am (before noon) or pm (after noon) indication.
24-Hour – Displays the time in 24 hour format.
4.10.8.3
Setting the Time Manually
When and where to use: If the time cannot update automatically through the infrastructure.
Procedure:
1 From the home screen, press the Menu key.
2 Select SetupTime & DateSetSet Time.
3 Enter current time using Navigation keys or keypad.
4 Press Done.
4.10.8.4
Setting the Date Format
Prerequisites: If MenuSetupTime & DateDisplay is set to Time & Date or Date Only.
MN006260A01-AD
Chapter 4 : Main Menu
125