User's Guide

Table Of Contents
4.10.5.3
Audio Toggle
You can control audio routing between the speaker and earpiece for any private or group call through
the dedicated Speaker Control key. You can also define through the menu to have all group calls in
high audio or controlled by the Speaker Control key.
4.10.5.3.1
Setting Audio Toggle
Procedure:
1 From the home screen, press the Menu key.
2 Select SetupAudioAudio Toggle.
3 Select one of the following options:
Always Loud – The audio sound comes from the speaker (high audio only). SPEAKER
CONTROL key is disabled.
Spkr Cntrl – The audio goes through the earpiece or the speaker. You can switch between
low and high audio by pressing SPEAKER CONTROL key.
4.10.5.4
Volume Adjustment Mode
You can set the volume to Individual or Common. When set to Common, the audio has one setting for
all items.
When set to Individual, the volume level for the following options can be set per user preferences.
Voice
Duplex
Simple
Keypad
Tones
Call-Out
The Volume Control Mode is configurable using the Customer Programming Software (CPS).
NOTE: When a volume control capable Bluetooth device is connected, the radio always uses
the Common setting.
You can configure the maximum volume offsets (dB) and the volume range (dB) through CPS. The
field is Audio SettingsUser Profile. The volume control in the radio is divided into 13 steps, from 0
to 14. If for example, the vol. range is set to 39, each step on the volume indication bar is 3 dB.
4.10.5.4.1
Setting Volume Adjustment Mode
Procedure:
1 From the home screen, press the Menu key.
2 Select SetupAudioVolume Adj. Mode.
3 Select one of the following options:
Individual – You can set Duplex, Simplex, Earpiece, Speaker, and Keypad per your
preferences in MenuSetupSet Volume.
MN006260A01-AD
Chapter 4 : Main Menu
119