User's Guide

3 Highlight the required device and press Menu/OK. Select Connect/Disconnect.
NOTE:
Depending on languages installed on the radio, some characters in names of devices
might not be displayed properly.
Radio-initiated automatic reconnection with several remote Bluetooth devices at the
same time cannot be guaranteed to be successful in 100%, due to the fundamental
nature of Bluetooth. In case the reconnection fails after a power cycle (power off and
power on of the radio), reconnect the device manually.
4.6.4.2
Managing Devices
Procedure:
1 From the home screen, press the Menu key.
2 Select Bluetooth→Devices.
3 Highlight the required device and press the Menu key.
• Name – shows the name of the device (up to 32 characters long). The name is editable only
if it has not been pre-set by the service provider.
• Type – displays the device type. This menu item cannot be configured.
• Access – defines how the radio behaves during a reconnection attempt after losing
connection to this device:
• Automatic – the radio connects with the device automatically.
NOTE: On some headsets, you may have to press the "Call" button to trigger
reconnection.
• Ask – the radio asks you for confirmation before connecting with the device.
• Manual – the radio connects with the device manually.
• Never – the radio never connects with the device.
• Delete – deletes the device from the paired devices lists.
4.6.5
My Received Files
The My Received Files menu item lists all files received by your radio through Bluetooth and allows
you to manage them
My Received Files is visible only if the Object Push Profile (OPP) is enabled.
4.6.5.1
Receiving Files through Bluetooth
Prerequisites:
Your radio receives a file transfer request from another Bluetooth-enabled device. Your radio is in
Discoverable Mode.
MN006260A01-AD
Chapter 4 : Main Menu
105