User's Guide

Icon Description
or
Sent Successfully
2.4
LED Indications
The LED Indicator shows the operational status of your radio.
A qualified technician can permanently disable the LED indication by preprogramming it.
Table 14: LED Indications
Indication Status
Blinking Red
• The radio is indicating a battery mismatch.
• The radio has failed the self-test upon powering up.
• The radio is receiving an emergency transmission.
• The radio is transmitting in low battery state.
• The radio has moved out of range if Auto-Range Transponder
System is configured.
• Mute Mode is enabled.
Rapidly Blinking Red
• The radio is receiving Over-the-Air file transfer (Option Board
firmware file, Network Frequency file, or Option Board Code-
plug file) when in Connect Plus.
• The radio is upgrading to a new Option Board firmware file
when in Connect Plus.
Solid Yellow
• The radio is in Bluetooth Discoverable Mode.
• The radio is monitoring a conventional channel.
Blinking Yellow
• The radio has yet to respond to a Call Alert.
• The radio is scanning for activity.
• All Capacity-Plus–Multi-Site channels are busy.
Double Blinking Yellow
• The radio has Auto Roaming enabled.
• The radio is actively searching for a new site.
• The radio has yet to respond to a Group Call Alert.
• The radio is locked.
• The radio is not connected to the repeater while in Capacity
Plus.
• All Capacity-Plus channels are busy.
Solid Green
• The radio is powering up.
• The radio is transmitting.
• The radio is sending a Call Alert or an emergency transmis-
sion.
MN007848A01-AA
Chapter 2 : Radio Overview
19