User's Guide

19.4.3
Changing Boundary Settings
Procedure:
1 From the WAVE application, navigate to
Map.
2 Tap Map Boundary Enable→ Boundary Settings.
3 Perform one of the following actions:
• To update the interval, tap Update Interval→<required minutes>.
• To set the duration of the boundary to be actived, tap Active Boundary Time→<required
days>→<required hours>.
• To enable notification, tap Notify Me→On.
• To enable notifcation to alert members, tap Notify Members→On.
• To allow group members from outside boundary to receive an initial notification when a
boundary is created, tap Initial Member Notification→Outside Boundary→OK.
• To allow group members from inside boundary to receive an initial notification when a
boundary is created, tap Initial Member Notification→Inside Boundary→OK.
4 To return to the map, tap Back.
MN007267A01-AC
Chapter 19 : Map
50