User's Guide

Chapter 12
Emergency Operation
You can declare an emergency to contact or talkgroup through emergency calling and alert.
NOTICE: If your radio does not support Emergency operation, your radio display a notification
on the non-activated Emergency feature.
12.1
Declaring Emergency
Procedure:
Press and hold the Emergency button.
Your radio shows the following indications:
• The Emergency tone sounds.
• The amber LED lights up.
If Emergency is not available on your radio, your radio shows the following indications:
• A bad bonk sounds.
• A message shows Emergency not initiated. The Emergency feature is not
supported.
NOTICE: Only authorized user can declare an emergency for the required contact. Refer to
Enabling User Check on page 42 for more information.
12.2
Receiving Emergency Alerts
When you receive an Emergency Alert, your radio shows the following indications:
• The Emergency tone sounds.
• The amber LED blinks for 2 seconds.
• The device is locked in to the emergency call until the emergency is canceled.
12.3
Canceling Emergency
Procedure:
Press and hold the Emergency button.
Your radio shows the following indications:
• The Emergency tone dissolves.
• The amber LED extinguishes.
NOTICE: Only authorized user can cancel an emergency for the required contact. Refer to
Enabling User Check on page 42 for more information.
MN007267A01-AC
Chapter 12 : Emergency Operation
38