User's Guide

18.2
Sharing Location with Location Capability Enabled
Prerequisites: Turn on your radio location and enable the Location Capability feature.
Procedure:
1 From the WAVE application, navigate to Map.
2 Tap Tracked Group Selector.
Your radio displays the List of Groups with Location Capability.
3 Select your desired group and perform one of the following actions:
• To share current location, tap My Location → Share.
• To share an arbitrary location, search for your desired location and tap Share.
Your radio displays Location Sent.
18.3
Viewing Members Location
Prerequisites: Turn on your radio location and enable the Location Capability feature.
Procedure:
1 From WAVE application, navigate to Map.
2 Tap Tracked Group Selector .
Your radio displays the List of Groups with Location Capability.
3 Select your desired group.
Your radio displays all the members in the group with their respective location.
4 To view each members name and their current location, tap Map Pin.
18.4
Boundary
A supervisor can create a boundary for a group. When any member of the group enters or leaves the
boundary, the supervisor receives notifications.
The supervisor can refresh the location and modify an existing boundary set for a group. The Active
Boundary Time setting controls the duration of the boundary to be actived.
The supervisor can create a boundry from the list of groups or through quick group. The maximum
members allowed in a quick group is 10.
MN007267A01-AA
Chapter 18: Map
44