User's Guide

6.2.5.5
Receiving an Inbound Phone Talkgroup
Call
When you receive an Inbound Phone Talkgroup Call, the
LED blinks green. The radio unmutes and the incoming
group call sounds through the radio's speaker.
Press the
PTT button to talk and release it to listen.
6.2.5.6
Inbound Phone Multi-Group Call
When you receive an Inbound Phone Multi-Group Call, the
LED blinks green.
The radio unmutes and the incoming
multi-group call sounds through the radio speaker.
6.2.6
Making a Radio Call
After selecting your channel, you can select a subscriber
alias or ID, or group alias or ID by using:
• The Channel Selector Knob.
• A programmed One Touch Access button – The One
Touch Access feature allows you to make a Private Call
to a predefined ID easily. This feature can be assigned
to a short or long programmable button press. You can
only have one ID assigned to a One Touch Access
button. Your radio can have multiple One Touch
Access buttons programmed.
NOTICE:
Your radio must have the Privacy feature enabled
on the channel to send a privacy-enabled
transmission. Only target radios with the same Key
Value and Key ID as your radio will be able to
unscramble the transmission.
See Privacy on page 120
for more information.
6.2.6.1
Making a Call
This feature allows the radio users to make different call
types : Group Call, Private Call, Site All Call, Multi-group
Call.
6.2.6.1.1
Making a Group Call
To make a call to a group of users, your radio must be
configured as part of that group.
English
99