User's Guide

desired network. These network-to-zone assignments are
configured by your dealer through radio programming.
6.2.4
Selecting a Call Type
Use the Channel Selector Knob to select a call type. This
can be a Group Call, Multi-group Call, Site All Call or
Private Call, depending on how your radio is programmed.
If you
change the Channel Selector Knob to a different
position (that has a call type assigned to it), this causes the
radio to re-register with the Connect Plus site. The radio
registers with the Registration Group ID that has been
programmed for the new Channel Selector Knob position
call type.
If you select a position that has no call type assigned to it,
your radio sounds a continuous tone. Your radio does not
operate when selected to an unprogrammed channel, use
the Channel Selector Knob to select a programmed
channel instead.
Once the required zone is set (if you have multiple
zones in your radio), turn the programmed Channel
Selector Knob to select the call type.
6.2.5
Receiving and Responding to a
Radio Call
Once the channel, subscriber ID or call type is set, you can
proceed to receive and respond to calls.
The LED lights up solid green while the radio is transmitting
and blinks green when the radio is receiving.
English
96