User's Guide

5.7.17.1
Status Message
This feature allows the user to send status messages to
other radios.
The Quick Status list is configured by using CPS-RM and
comprises up to a maximum of 99 statuses.
The maximum length for each status message is 16
characters.
The Text-to-Speech feature if enabled, allows the radio to
audibly indicate the status messages that are received.
NOTICE:
Text-to-Speech is configured using CPS. Check
with your dealer or system administrator to
determine how your radio has been programmed.
5.7.17.1.1
Sending Status Messages
Follow the procedure below to send a status message.
Press the programmed One Touch Access button.
If successful:
• A positive indicator tone sounds.
•
The LED turns off.
If unsuccessful:
• A negative indicator tone sounds.
• The LED turns off.
5.7.17.2
Turning Privacy On or Off
Follow the procedure to turn privacy on or off on your radio.
Press the programmed Privacy button.
5.7.18
Stun/Revive
This feature allows you to enable or disable any radio in the
system. For example, the dealer or system administrator
may want to disable a stolen radio to prevent unauthorized
users from using it, and enable the radio when it is
recovered.
A radio can be disabled (stunned) or enabled (revived)
either through the console or through a command initiated
by another radio.
English
79