User's Guide

3 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
•
Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
4 Release the PTT button to listen.
5 Press the PTT button to respond to the call.
If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button, indicating
the channel is free for you to respond.
6 Press the Emergency Off button to exit the
Emergency mode.
NOTICE:
Depending on how your radio is
programmed, you may or may not hear a
Talk Permit tone. Your radio dealer or system
administrator can provide more information
on how your radio has been programmed for
Emergency.
The Emergency Call initiator may press the
programmed Cancel button to end an on-
going emergency call. The radio returns to a
call idle state.
5.7.15.3
Sending Emergency Alarms with Voice
to Follow
This feature allows you to send an Emergency Alarm with
Voice to Follow to a group of radios. Your radio microphone
is automatically activated, allowing you to communicate
with the group of radios without pressing the PTT button.
This activated microphone state is also known as hot mic.
English
75