User's Guide

- For Vibrate Only, Voice Announcement or Text-
to-Speech sounds Ring Alert Type and the radio
vibrates.
- For Ring and Vibrate, Voice Announcement or
Text-to-Speech sounds
Ring Alert Type and the
radio sounds a ring tone and vibrates.
5.7.12.2
Configuring Vibrate Style
NOTICE:
The programmed Vibrate Style button is assigned
by your dealer or system administrator. Check with
your dealer or system administrator to determine
how your radio has been programmed.
Vibrate Style is enabled when the Vibrating Belt Clip is
attached to the radio with a battery that supports the vibrate
feature.
You can configure the vibrate style by performing the
following action.
• Press the programmed Vibrate Style
button to
toggle to short, medium, or long option and the radio
vibrates accordingly. Voice Announcement or Text-
to-Speech sounds Vibrate Style.
5.7.12.3
Escalating Alarm Tone Volume
The radio can be programmed to continually alert, when a
radio call remains unanswered. This is done by
automatically increasing the alarm tone volume over time.
This feature is known as Escalert.
5.7.13
Call Alert Operation
Call Alert paging enables you to alert a specific radio user
to call you back when they are able to do so.
This feature is accessible by using a programmed One
Touch Access button.
In Capacity Max, the Call Alert feature allows a radio user
or a dispatcher to send an alert to another radio user
requesting the radio user to call back the initiating radio
user when available. Voice communication is not involved
in this feature.
The Call Alert Operation can be configured by the dealer or
the system administrator to allow the user to press the PTT
button to respond directly to the call initiator by making a
Private Call.
English
69