User's Guide

2 Emergency Call for P2 Talkgroup
3 Emergency Call for Non-priority Talkgroups in the
Receive Group List
4 All Call
5 P1 Talkgroup Call
6 P2 Talkgroup Call
7 Non-priority Talkgroups in the Receive Group List
NOTICE:
This feature is programmed by the system
administrator. Check with your dealer or system
administrator for more information.
5.7.6
Multi-Talkgroup Affiliation
Your radio can be configured for up to seven talkgroups at
a site.
Of the 16 talkgroups in the Receive Group List, up to seven
talkgroups can be assigned as affiliation talkgroups. The
selected talkgroup and the priority talkgroups are
automatically affiliated.
5.7.7
Talkback
The Talkback feature allows you to respond to a
transmission while scanning.
If your radio scans into a call from the selectable group
scan list, and if the PTT button is pressed during the
scanned call, the operation of the radio depends on
whether Talkback was enabled or disabled during radio
programming. Check with your dealer or system
administrator for more information.
Talkback Disabled
The radio leaves the scanned call and attempts to
transmit on the contact for the currently selected
channel position. After the Call Hang Time on the
currently selected contact expires, the radio returns to
the home channel and starts the Scan Hang Time
Timer. The radio resumes group scan after its Scan
Hang Time Timer expires.
Talkback Enabled
If the PTT button is pressed during the Group Hang
Time of the scanned call, the radio attempts to transmit
to the scanned group.
English
63