User's Guide

5.7.3.1
Turning Talkgroup Scan On or Off
Follow the procedure to turn Talkgroup Scan on or off on
your radio.
Press the programmed Scan button.
If scan is enabled:
• The yellow LED blinks.
•
A positive indicator tone sounds.
If scan is disabled:
• The LED turns off.
• A negative indicator tone sounds.
5.7.4
Receive Group List
Receive Group List is a feature that allows you to create
and assign members on the talkgroup scan list.
This list is created when your radio is programmed and it
determines which groups can be scanned. Your radio can
support a maximum of 16 members in this list.
If a talkgroup is programmed as Permanent Talkgroup, you
are unable to edit the talkgroup from the scan list.
NOTICE:
Receive Group List is programmed by the system
administrator. Check with your dealer or system
administrator for more information.
5.7.5
Priority Monitor
The Priority Monitor feature allows the radio to
automatically receive transmission from talkgroups with
higher priority even when radio is in a talkgroup call.
Radio leaves lower priority talkgroup call for higher priority
talkgroup call.
NOTICE:
This feature can only be accessed when Talkgroup
Scan feature is enabled.
Priority Monitor feature applies only to members in the
Receive Group List. There are two Priority Talkgroups:
Priority 1 (P1) and Priority 2 (P2). P1 has higher priority
than P2. In Capacity Max system, the radio receives
transmission according to the priority order below:
1 Emergency Call for P1 Talkgroup
English
62