User's Guide

4
Press to end the call.
If the end-call-setup is successful, a tone sounds
and the display shows Call Ended.
If the end-call-setup is unsuccessful, your radio
returns to the Phone Call screen.
When you press PTT button while in the Phone
Contacts screen, a tone sounds and the display
shows Press OK to Place Call.
When the telephone user ends the call, a tone
sounds and the display shows Phone Call Ended.
NOTICE:
During channel access, press
to dismiss
the call attempt and a tone sounds.
During the call, when you press One Touch
Access button with the deaccess code
preconfigured or enter the deaccess code as
the input for extra digits, your radio attempts
to end the call.
5.6.5.3
Responding to Phone Calls as All Calls
When you receive a Phone Call as an All Call, the receiving
radio is unable to talkback or respond. The recipient user is
also not allowed to end the All Call.
•
The green LED blinks.
•
Your radio unmutes and the incoming call sounds
through the speaker.
5.6.5.4
Responding to Phone Calls as Group
Calls
Follow the procedure to respond to Phone Calls as Group
Calls on your radio.
When you receive a Phone Call as a Group Call:
• The green LED blinks.
• Your radio unmutes and the incoming call sounds
through the speaker.
1 Press the PTT button to respond to the call.
2 Release the PTT button to listen.
English
57