User's Guide

feature can be assigned to a short or long programmable
button press.
You can only have one alias or ID assigned to a One
Touch Call button. Your radio can have multiple One Touch
Call buttons programmed.
1 Press the programmed One Touch Call button to
make a Private Call to the pre-defined Private Call
alias or ID.
2 Press the PTT button to make the call.
The LED lights up solid green.
3 Wait for the Talk Permit Tone to finish (if enabled)
and speak clearly into the microphone.
4 Release the PTT button to listen.
When the target radio responds, the LED blinks
green.
If there is no voice activity for a predetermined
period of time, the call ends.
Both the call initiator and recipient are able to
terminate an on-going Private Call by pressing the
programmed Cancel button.
5.6.3.3
Receiving Private Calls
When you receive Private Calls configured as Off Air Call
Set-Up (OACSU):
• The green LED blinks.
•
Your radio unmutes and the incoming call sounds
through the speaker.
English
52