User's Guide

5.6.2.1
Making Broadcast Calls
1 Do one of the following:
• Select a channel with the active group alias or ID.
See
Selecting a Call Type on page 45.
• Press the programmed One Touch Access
button.
2 Press the PTT button to make the call.
The green LED lights up.
3 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
•
Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
The call initiator can press the programmed Cancel
button to end the Broadcast Call.
5.6.2.2
Receiving Broadcast Calls
Follow the procedure to receive a Broadcast Call on your
radio.
When you receive a Broadcast Call:
• The green LED blinks.
•
Your radio unmutes and the incoming call sounds
through the speaker.
NOTICE:
Recipient users are not allowed to Talkback during
a Broadcast Call. The Talkback Prohibit Tone plays
momentarily if the PTT button is pressed during a
Broadcast Call.
5.6.3
Private Call
A Private Call is a call from an individual radio to another
individual radio.
There are two ways to set up a Private Call.
• The first call type is called Off Air Call Set-Up (OACSU).
OACSU sets up the call after performing a radio
presence check and completes the call automatically.
English
50