User's Guide

Programmed One Touch Access Button
This method is used for Group, Private, and Phone
Calls only.
You can only have one ID assigned to a One Touch
Access button with a short or long programmable
button press.
Programmable Button
This method is used for Phone Calls only.
5.6.1
Group Calls
Your radio must be configured as part of a group to receive
a call from or make a call to the group of users.
5.6.1.1
Making Group Calls
To make a call to a group of users, your radio must be
configured as part of that group.
1 Do one of the following:
• Select a channel with the active group alias or ID.
See
Selecting a Call Type on page 45.
• Press the programmed One Touch Access
button.
2 Press the PTT button to make the call.
The green LED lights up.
3 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
•
Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
4 Release the PTT button to listen.
The green LED lights up when the target radio
responds.
5 If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button, indicating
the channel is free for you to respond. Press the
PTT
button to respond to the call.
The call ends when there is no voice activity for a
predetermined period.
English
48