User's Guide

5.5.1
Selecting Zones
Follow the procedure to select the required zone on your
radio.
Press the programmed Zone Toggle button.
One of the following tone sounds:
Positive Indicator Tone
Radio is in Zone 2.
Negative Indicator Tone
Radio is in Zone 1.
NOTICE:
For all Non-keypad radio, you are
recommended to enable Voice
Announcement feature for selecting zone.
The Voice Announcement feature can only
be enabled through CPS.
5.5.2
Selecting a Call Type
Use the Channel Selector Knob to select a call type. This
can be a Group Call, Broadcast Call, All Call, or Private
Call, depending on how your radio is programmed. If you
change the Channel Selector Knob to a different position
(that has a call type assigned to it), this causes the radio to
re-register with the Capacity Max System. The radio
registers with the Talkgroup ID that has been programmed
for the new Channel Selector Knob position call type.
Your radio does not operate when selected to an
unprogrammed channel, use the
Channel Selector Knob to
select a programmed channel instead.
Once the required zone is set (if you have multiple
zones in your radio), turn the programmed Channel
Selector Knob to select the call type.
English
45