User's Guide

ARTS-equipped radios transmit or receive signals
periodically to confirm that they are within range of each
other.
Your radio provides indications of states as follows:
First-Time Alert
A tone sounds.
ARTS-in-Range Alert
A tone sounds, if programmed.
ARTS-Out-of-Range Alert
A tone sounds. The red LED rapidly blinks.
NOTICE:
Check with your dealer or system administrator for
more information.
7.6.20
Over-the-Air Programming
Your dealer can remotely update your radio through Over-
the-Air Programming (OTAP) without any physical
connection. Additionally, some settings can also be
configured by using OTAP.
When your radio undergoes OTAP, the green LED blinks.
When your radio receives high volume data:
• The channel becomes busy.
• A negative tone sounds if you press the PTT
button.
NOTICE:
Once the programming is complete, a tone sounds,
and your radio restarts (powers off and on again).
7.6.21
Wi-Fi Operation
This feature allows you to set up and connect to a Wi-Fi
network. Wi-Fi supports updates for radio firmware,
codeplug, and resources such as language packs and
voice announcement.
NOTICE:
This feature is applicable to XPR 7350e/XPR 7380e
only.
Wi-Fi
®
is a registered trademark of Wi-Fi Alliance
®
.
Your radio supports WEP/WPA/WPA2-Personal and WPA/
WPA2-Enterprise Wi-Fi networks.
WEP/WPA/WPA2-Personal Wi-Fi network
Uses pre-shared key (password) based authentication.
Pre-shared key can be entered by using the menu or
CPS/RM.
English
172