User's Guide

NOTICE:
Your radio does not reinitiate the Emergency mode
automatically when it is powered up again.
Follow the procedure to exit Emergency mode on your
radio.
Do one of the following:
• Press the programmed
Emergency Off button.
• Turn off the radio and then, power it on again, if
your radio has been programmed to remain on
the Emergency Revert channel even after
acknowledgment is received.
• Change the channel to a new channel that has no
emergency system configured.
7.6.14
Man Down
NOTICE:
Man Down feature is applicable to only XPR
7350e/XPR 7380e
.
This feature prompts an emergency to be raised if there is
a change in the motion of the radio, such as the tilt of the
radio, motion and/or the lack of motion for a predefined
time.
Following a change in the motion of the radio for a
programmed duration, the radio pre-warns the user with an
audio indicator indicating that a change in motion is
detected.
If there is still no acknowledgment by the user before the
predefined reminder timer expires, the radio initiates an
Emergency Alarm or an Emergency Call. You can program
the reminder timer by using CPS.
7.6.14.1
Turning the Man Down Feature On or
Off
NOTICE:
The programmed Man Down button and Man Down
settings are configured using CPS. Check with your
dealer or system administrator to determine how
your radio has been programmed.
If you disable the Man Down feature, the programmed alert
tone sounds repeatedly until the Man Down feature is
enabled. A device failure tone sounds when the Man Down
feature fails while powering up. The device failure tone
continues until the radio resumes normal operation.
English
167