User's Guide

2 Wait for acknowledgment.
If successful:
• A positive indicator tone sounds.
If unsuccessful:
•
A negative indicator tone sounds.
7.6.7
Scan Lists
Scan lists are created and assigned to individual channels
or groups. Your radio scans for voice activity by cycling
through the channel or group sequence specified in the
scan list for the current channel or group.
Your radio can support up to 250 scan lists, with a
maximum of 16 members in a list.
Each scan list supports a mixture of both analog and digital
entries.
NOTICE:
This feature is not applicable in Capacity Plus.
7.6.8
Scan
Your radio cycles through the programmed scan list for the
current channel looking for voice activity when you start a
scan.
NOTICE:
This feature is not applicable in Capacity Plus.
During a dual-mode scan, if you are on a digital channel,
and your radio locks onto an analog channel, it
automatically switches from digital mode to analog mode
for the duration of the call. This is also true for the reverse.
There are two ways of initiating scan:
Main Channel Scan (Manual)
Your radio scans all the channels or groups in your
scan list. On entering scan, your radio may, depending
on the settings, automatically start on the last scanned
active channel or group, or on the channel where scan
was initiated.
Auto Scan (Automatic)
Your radio automatically starts scanning when you
select a channel or group that has Auto Scan enabled.
English
155