User's Guide

7.6.4
Monitor Feature
The feature allows you to ensure that a channel is free
before transmitting.
NOTICE:
This feature is not applicable in Capacity Plus–
Single-Site and Capacity Plus–Multi-Site.
7.6.4.1
Monitoring Channels
Follow the procedure to monitor channels.
1 Long press the programmed Monitor button.
If the channel is in use:
• You hear radio activity or total silence.
•
The yellow LED lights up.
If the monitored channel is free, you hear a “white
noise".
2 Press the PTT button to talk. Release the PTT
button to listen.
7.6.4.2
Permanent Monitor
The Permanent Monitor feature is used to continuously
monitor a selected channel for activity.
7.6.4.2.1
Turning Permanent Monitor On or Off
Follow the procedure to turn Permanent Monitor on or off
on your radio.
Press the programmed Permanent Monitor button.
When the radio enters the mode:
• An alert tone sounds.
•
The yellow LED lights up.
When the radio exits the mode:
• An alert tone sounds.
• The yellow LED turns off.
English
153