User's Guide

Turn the Channel Selector Knob to select the
channel, subscriber ID, or group ID.
7.5
Calls
This chapter explains the operations to receive, respond to,
make, and stop calls.
You can select a subscriber alias or ID, or group alias or ID
after you have selected a channel by using one of these
features:
Programmed One Touch Access Button
This method is used for Group, Private, and Phone
Calls only.
You can only have one ID assigned to a One Touch
Access button with a short or long programmable
button press.
Programmable Button
This method is used for Phone Calls only.
7.5.1
Group Calls
Your radio must be configured as part of a group to receive
a call from or make a call to the group of users.
7.5.1.1
Making Group Calls
Follow the procedure to make Group Calls on your radio.
1 Do one of the following:
• Select a channel with the active group alias or ID.
•
Press the programmed One Touch Access
button.
2 Press the PTT button to make the call.
The green LED lights up.
3 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
• Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
English
135