User's Guide

NOTICE:
A pin code may be required to be programmed in
your radio before it can pair with some devices.
Contact your dealer for more information.
6.3.15.2
Disconnecting from a Bluetooth Device
On your radio, press the programmed Bluetooth
Disconnect button.
A positive indicator tone sounds when disconnected.
6.3.15.3
Switching Audio Route between
Internal Radio Speaker and Bluetooth
Device
You can toggle audio routing between internal radio
speaker and external Bluetooth-enabled accessory.
Press the programmed Bluetooth Audio Switch
button.
A tone sounds when the audio route has switched.
6.3.15.4
Permanent Bluetooth Discoverable
Mode
NOTICE:
The Permanent Bluetooth Discoverable Mode can
only be enabled by using the MOTOTRBO CPS. If
enabled, you will not be able to use any Bluetooth
programmable button features.
Other Bluetooth-enabled devices can locate your radio, but
the devices cannot connect to the radio. It enables
dedicated devices to use your radio position in the process
of Bluetooth-based location.
Turn on your Bluetooth-enabled device and pair it with your
radio. Refer to the respective user manual of Bluetooth-
enabled device.
6.3.16
Wi-Fi Operation
This feature allows you to set up and connect to a Wi-Fi
network. Wi-Fi supports updates for radio firmware,
codeplug, and resources such as language packs and
voice announcement.
English
123