User's Guide

6.3.11.1
Turning Man Down Alarms On and Off
NOTICE:
The programmed Man Down button and Man Down
settings are configured using CPS. Check with your
dealer or system administrator to determine how
your radio has been programmed.
If you enable Man Down to maximum sensitivity and
set Vibrate Style to high, the radio automatically
restricts Vibrate Style to medium. This function
prevents high Vibrate Style from initiating the Man
Down emergency feature.
The procedure for turning the Man Down Alarms On and
Off depends on how your radio is programmed. If
programmed with a Man Down Alarms On/Off button, use
the button to toggle the Man Down Alarms On and Off. This
applies to all of the Man Down Alarms enabled for your
radio.
When using the programmable button to toggle the Man
Down Alarms On, your radio plays a tone that rises in pitch.
In order to hear the tones described above when turning
the Man Down Alarms On and Off, the MOTOTRBO radio
and Connect Plus Option Board must both be enabled for
keypad tones.
6.3.11.2
Resetting the Man Down Alarms
If your radio has been programmed with a Man Down
Alarms Reset button, it is possible to reset the Man Down
Alarms without turning them On or Off. This stops any Man
Down Alert Tone that is currently playing, and it also resets
the Alarm timers. However, it is still necessary to correct
the movement violation by taking the appropriate corrective
action described in the Man Down Alarms section. If the
movement violation is not corrected within a period of time,
the Alert Tone starts playing again.
6.3.12
Beacon Feature
The Beacon feature is part of Connect Plus Man Down, a
purchasable feature. Your dealer or Radio System
Administrator can tell you if the Beacon feature applies to
your radio.
If your radio has been enabled and programmed for one or
more of the Man Down Alarms, it can also be enabled for
the Beacon feature.
English
118